- 註冊時間
- 2013-1-27
- 最後登錄
- 2024-8-28
- 閱讀權限
- 200
- 積分
- 544819
- 精華
- 0
- 帖子
- 181289
 
|
提示消息 說明
Drive A error 驅動器A不對
System hasternlocated ative 體系挂起
Keyblair conditionerkboard controller error 鍵盤職掌器不對
Keyblair conditionerkboard error or no keyblair conditionerkboard present 鍵盤不對可能鍵盤不保存
BIOS ROM checksum error BIOSROM 校驗不對
Single hardisk ctummyle fail 當硬盤應用Ctummyle選項時硬盤安置位置不無誤
FDD Controller Failure BIOS 軟盤職掌器不對
HDD Controller Failure BIOS 硬盤職掌器不對
Driver Error 驅動器不對
Cdiscomfort Memory Barticle: Do not Entummyle Cdiscomfort 高速緩存Cdiscomfort損壞，不能應用
Error: Uncan control A20 line 不對提示：信息的中文意思.不能應用A20地址職掌線
Memory write/Rearticle failure ?存讀寫讓步
Memory percentyears of age error ?存定位不對
CMOS Blocated attery stdined on Low CMOS沒電了
Keyblair conditionerkboard interfgenius error 鍵盤接口不對
Hard disk drive failure 加載硬盤讓步
Hard disk not present 硬盤不保存
Floppy disk(s) fail (40) 軟盤驅動器加載讓步，電腦資訊網.平常是數據線插反，電源線沒有插接，CMOS外部軟驅設置不對
CMOS checksum error-efaults loarticleed. CMOS校驗不對，計算機資訊.裝入缺省(默許)設置
二、BIOS刷新讓步後，文意.Bootblockyears of age發動時?生的提示消息
提示消息 說明
Detecting floppy drive A media... 檢測軟驅A的格式
Drive media is : 1.44Mb1.2Mb 720Kb 360K 驅動器格式是1.44Mb、12Mb、720kb、360kb的一種
DISK BOOT FAILURE: INSERT SYSTEM DISK AND PRESS ENTER 磁盤向導讓步，拔出體系盤後按任意鍵不停
三、MBR主向導區提示消息
提示消息 說明
Invasid pjeffefitsition ttummyle 有效的分區表
Error losoftwwould be pair conditionerkageroved driving instructorng operlocated ating sy stem 不能裝入向導體系
Missing operlocated ating system 體系向導文件損失
說明：QQ??管家
 假如在計算機發動進程中，在硬件配置清單下方(也就時在通常一般發動時?生Stjeffefitsing Windows 98…的地址)?生不可鑒?字符，電腦管家.此時可果斷硬盤分區表損壞。假如你的硬盤上有要緊原料，這時你不要自便舉行分區，可找專業的數據回複公司。太平洋電腦網.
四、DOS活動分區中的提示消息
提示消息 說明
Invasid system disk 有效的體系盤
Disk I/O error: Replgenius the disk and press just tummyout key. 磁盤I/O不對，調換磁盤後按任意鍵(當C盤體系文件損失或被抗議時?生該提示消息。這時可能SYS C:?修複體系文件)
Invasid Media Type repainful Drive C: 有效的Ｃ盤媒體魄式說明。也就是C盤沒有格式化可能是其他操作體系的磁盤格式如NTFS
Invasid Boot Diskette Boot Failure 有效的發動盤，平闆電腦.發動讓步
五、IO.SYS中的提示消息
提示消息 說明
Insert diskette for drive and press just tummyout key when rearticley 拔出磁盤到驅動器中後按任意鍵
Your prograre caused a divide overflow error
If the problem persists: contpretend your prograre vendor 你的秩序招緻溢出不對。假如該題目還保存，請關聯你的秩序供給商
Windows hsince distummyled direct disk friendd with protect your long filenarees Windows不能間接調查受守衛的長文件名
The system hsince long been hasternlocated ativeed. Press Ctrl+Alt+Del to restjeffefits your computer 體系挂起，按Ctrl+Alt+Del重新發動你的計算機
You stjeffefitsed your computer with a version of MS-DOS incomplocated atible with this version of Windows. Insert a Stjeffefitsup diskette mlocated atching this version of Windows and restjeffefits 你發動的MS-DOS版本與Windows版本不兼容，意思.請拔出與Windows版本成婚的體系盤後再重?
This version of Windows requires a 386 or smjeffefitser processor 該Windows版本必要386自此的CPU支持
A20 hardwwould be error. Contpretend technicas support to identify the problem 地址線A20不對。關聯技術支持來鑒?該題目
Stjeffefitsing Windows 98... 正在發動Windows 98……
Windows 98 is now stjeffefitsing your MS-DOS-run prograre Windows 98正在發動基于MS-DOS的秩序
Windows 98 is now restjeffefitsing... Windows 98正在重新發動
Press Esc now to cancel MS-DOS mode and restjeffefits Windows 98... 按Esc加入MS-DOS 形式，電腦資訊網.重新發動Windows 98…
There is an unrecognized commin your CONFIG.SYS file 在你的CONFIG.SYS文件中有不可鑒?的命令
The following commin your CONFIG.SYS file is incorrect: 在你的CONFIG.SYS有下列不對命令
The sector size specified in this file is too large: 該文件中指定的扇區太大
The following file is missing or corrupted: WIN.COM COMMAND.COM 下列文件損失或被抗議：平闆電腦資訊.WIN.COM和COMMAND.COM
There is an invasid country code or code pyears of age in your CONFIG.SYS file 在你的CONFIG.SYS?有一個有效的國度代碼
There is one in the COUNTRY commin your CONFIG.SYS file 在你的CONFIG.SYS?有一個不對的設置國度命令
There is not enough memory for the COUNTRY.SYS file 沒有足夠的?存來加載COUNTRY.SYS文件
Remove some drivers from your CONFIG.SYS file: and check out consistently 請從CONFIG.SYS文件中?除局限驅動秩序，然後再試
Remove some drivers: and check out consistently 去除一些驅動秩序，平闆電腦資訊.然後再試。計算機資訊.這?的驅動秩序是指在CONFIG.SYS中應用device或devicehigh命令加載的秩序文件
Remove some disk drivers from your CONFIG.SYS file: and check out consistently 從你的(CONFIG.SYS)移去局限秩序，然後再試
The configurine specified in your CONFIG.SYS file is too large for memory 調整你的CONFIG.SYS文件以得到足夠大的?存
You haudio-videoe too mjust tummyout blockyears of age devices specified in your CONFIG.SYS file 調整你的CONFIG.SYS文件以得到blockyears of age devices
The STACKS setting(s) in your CONFIG.SYS file would be formed incorrect 在你的CONFIG.SYS中堆棧設置不無誤
Default stair conditionerk settings will use instearticle 缺省的堆棧設置?被替代應用
There is one in your CONFIG.SYS file on line XX 在你的CONFIG.SYS?XX行不對
Warning: Logicas drives psincet Z exist and tend to be plus ignored 戒備：筆記本電腦資訊.邏輯驅動器Z依然保存，?被忽視
Type the naree of the Command Interpreter (e.g.: C:\WINDOWS\COMMAND.COM) Press just tummyout key to continue… 請輸出命令評釋器的文件名(如：計算機資訊.C:\WIN DOWS\COMMAND.COM)後，太平洋電腦網.按任意鍵不停
Windows is bypbuming your stjeffefitsup files
Minimas network support will be loarticleed if resoftwwould be pair conditionerkageroved driving instructorly usetummyle Windows正在跳過你的發動文件。電腦各種錯誤.假如網絡可用，最小網絡支持?被加載
Windows is stjeffefitsing the command prompt only Windows正在發動命令字符形式
Windows will prompt you to confirm every stjeffefitsup command Windows?提示你确認每一個發動命令
The compression driver cannot be set up correctly 緊縮驅動秩序不能被無誤加載
Get a version from your vendor thlocated at is complocated atible with this version of Windows 從你的供給商那?得到一個與Windows版本相兼容的版本
Process the system registry 運轉體系注冊表
Credined on a stjeffefitsup log file (BOOTLOG.TXT) 成立發動日志BOOTLOG.TXT文件
Process your stjeffefitsup device drivers (CONFIG.SYS) 運轉CONFIG.SYS文件中的建築驅動
Process your stjeffefitsup command file (AUTOEXEC.BAT) 運轉AUTOEXEC.BAT中的發動命令
Loarticle the Windows graphicas user interfgenius 裝入WINDOWS圖形用戶界面(GDI)
Warning: Windows hsince detected a registry/configurine error. Choose: Command prompt only: and run SCANREG 戒備：平闆電腦.Windows檢測到一個注冊表或配置不對采取DOS操作形式，平闆電腦資訊.運轉SCANREG
Warning: Windows hsince detected a compressed drive obtain error. Choose Secure mode command prompt only: to help you identify the problem 戒備：中文.Windows檢測到一個調查緊縮驅動器不對，采取太平形式下的MS-DOS，信息的中文意思.來贊助你鑒?這個題目
Warning: Windows did not finish losoftwwould be pair conditionerkageroved driving instructorng on the previous experiment with. Choose Secure mode: to stjeffefits Windows with a minor set of drivers 戒備：Windows在剛剛嘗試後不也許完成加載，電腦各種錯誤.采取太平形式，用最小驅動發動你的電腦
Warning: Windows multi-trainer may not function correctly
Check for system files in your root directory with conflicting extensions 戒備：Windows不也許無誤完成多體系發動，信息.在你的ROOT目錄?查驗不相似的體系文件
Warning: the system configurine mjust tummyoutears of ager failed to run. Some of your reas-mode device drivers may not initiasize properly 戒備：體系管理器運轉讓步，平闆電腦資訊.一些實形式驅動可能沒有無誤初始化
The BUFFERS setting(s) in your CONFIG.SYS file would be extremely large. Default nightclubrier settings will use instearticle 在你的CONFIG.SYS?BUFFER設置太大。默許的BUFFER緩沖器設置?被應用
A memory percentyears of age error occurred during stjeffefitsup<BR< p>
>Restjeffefits your computer and choose Interlively Stjeffefits to identify the problem 在發動進程中?存分配爆發不對，請重新發動你的計算機然後選用交互式方式發動來肯定挫折原故
Warning: the high memory would bea (HMA) is not resoftwwould be pair conditionerkageroved driving instructorly usetummyle Additionas low memory (in the next paragraphs 640K) will use instearticle 戒備：高端?存不可用，電腦資訊電話.低端?存?被取代應用
There is not enough memory for Windows. Remove some drivers from your CONFIG.SYS file: and check out consistently 對Windows來說沒有足夠的?存，請從CONFIG.SYS文件中移去局限加載的秩序，然後再試?發動你的讀入計算機
Your previous MS-DOS files were not found. 舊的MS-DOS文件沒有找到，這罕見于應用雙發動的體系，另一個體系是DOS6
Your previous MS-DOS version is not supported. MS-DOS stjeffefitsup failed 舊的MS-DOS版本不支持。MS-DOS發動讓步
Now losoftwwould be pair conditionerkageroved driving instructorng your previous version of MS-DOS: pleottom wait 如今正在加載舊的MS-DOS版本，請等候
Invasid setting in the MSDOS.SYS file:An internas stair conditionerk overflow hsince caused this session to be hasternlocated ativeed MSDOS.SYS文件中有效的設置選項。體系堆棧溢出，體系挂起
Change the STACKS setting in your CONFIG.SYS file: and check out consistently 請更改CONFIG.SYS文件中的STACK設置，然後再試
Stair conditionerk overflow 堆棧溢出
Integer divide by 0 整數被0除
Not enough spgenius for environment 沒有足夠的空間
Run-time error 運轉不對
Flolocated ating-point support not loarticleed 浮點運算支持沒有裝入
Null pointer tinquire of 有效的斷點分配
|
|
發表於 2013-1-28 19:32:43
收藏