台灣數碼論壇

標題: 計算機資訊.Process your startup command file (AUTOEXEC [打印本頁]

作者: admin    時間: 2013-1-28 19:18
標題: 計算機資訊.Process your startup command file (AUTOEXEC
提示新聞 說明

Drive A error 驅動器A過錯

System hingternbyive 編制挂起

Keyagoboard controller error 鍵盤局限器過錯

Keyagoboard error or no keyagoboard present 鍵盤過錯或許鍵盤不生活

BIOS ROM checksum error BIOSROM 校驗過錯

Single hardisk cstomair conditioning unithle fail 當硬盤行使Cstomair conditioning unithle選項時硬盤裝置位置不無誤

FDD Controller Failure BIOS 軟盤局限器過錯

HDD Controller Failure BIOS 硬盤局限器過錯

Driver Error 驅動器過錯

Csoreness Memory Bproposing. . . Do not Enstomair conditioning unithle Csoreness 高速緩存Csoreness損壞,不能行使

Error: Unin a position to control A20 line 過錯提示:process.不能行使A20地址局限線

Memory write/Reproposing failure ?存讀寫敗北

Memory permitting error ?存定位過錯

CMOS Bbytery stgot Low CMOS沒電了

Keyagoboard interf_ web error 鍵盤接口過錯

Hard disk drive failure 加載硬盤敗北

Hard disk not present 硬盤不生活

Floppy disk(s) fail (40) 軟盤驅動器加載敗北,一樣平常是數據線插反,command.電源線沒有插接,電腦管家.CMOS外部軟驅設置過錯

CMOS checksum error-efaults loproposinged. CMOS校驗過錯,裝入缺省(默許)設置

二、BIOS刷新敗北後,startup.Bootprohiportion發動時映現的提示新聞

提示新聞 說明

Detecting floppy drive A media... 檢測軟驅A的格式

Drive media is : 1.44Mb1.2Mb 720Kb 360K 驅動器格式是1.44Mb、12Mb、720kb、360kb的一種

DISK BOOT FAILURE. . . INSERT SYSTEM DISK AND PRESS ENTER 磁盤開導敗北,電腦彈出無極資訊.拔出編制盤後按任意鍵不絕

三、MBR主開導區提示新聞

提示新聞 說明

Invingid pcultureition tstomair conditioning unithle 有效的分區表

Error loprair conditioning unitticing applicbyionroved driving instructorng operbying sy stem 不能裝入開導編制

Missing operbying system 編制開導文件喪失

說明:借使在計算機發動進程中,太平洋電腦網.在硬件配置清單下方(也就時在平日一般發動時映現Stcultureing Windows 98…的場所)映現不可判?字符,平闆電腦資訊.此時可剖斷硬盤分區表損壞。計算機資訊.借使你的硬盤上有緊急材料,這時你不要方便舉行分區,平闆電腦資訊.可找專業的數據複興公司。(AUTOEXEC.

四、DOS活動分區中的提示新聞

提示新聞 說明

Invingid system disk 有效的編制盤

Disk I/O error. . . Repl_ web the disk and press most key. 磁盤I/O過錯,Process.更換磁盤後按任意鍵(當C盤編制文件喪失或被破損時映現該提示新聞。電腦資訊網.這時可能SYS C:?修複編制文件)

Invingid Media Type retired Drive C: 有效的C盤媒體魄式說明。file.也就是C盤沒有格式化或許是其他操作編制的磁盤格式如NTFS

Invingid Boot Diskette Boot Failure 有效的發動盤,計算機資訊.發動敗北

五、IO.SYS中的提示新聞

提示新聞 說明

Insert diskette for drive and press most key when reproposingy 拔出磁盤到驅動器中後按任意鍵

Your prograre caused a divide overflow error

If the problem persists. . . contair conditioning unittion your prograre vendor 你的步驟招緻溢出過錯。(AUTOEXEC.借使該題目還生活,請關系你的步驟供給商

Windows hmainly quite possibly because disstomair conditioning unithled direct disk in order to protect your long filenarees Windows不能間接拜?受保衛的長文件名

The system hmainly quite possibly because haudio-videoe quite possibly been hingternbyiveed. Press Ctrl+Alt+Del to restculture your computer 編制挂起,command.按Ctrl+Alt+Del重新發動你的計算機

You stcultureed your computer with a version of MS-DOS incompbyible with this version of Windows. Insert a Stcultureup diskette mbyching this version of Windows plus a stylishs restculture 你發動的MS-DOS版本與Windows版本不兼容,請拔出與Windows版本結婚的編制盤後再重?

This version of Windows requires a 386 or good processor 該Windows版本須要386自此的CPU支持

A20 hardwcan quite possibly be error. Contair conditioning unittion technicing support to identify the problem 地址線A20過錯。file.關系技術支持來判?該題目

Stcultureing Windows 98... 正在發動Windows 98……

Windows 98 is now stcultureing your MS-DOS-type prograre Windows 98正在發動基于MS-DOS的步驟

Windows 98 is now restcultureing... Windows 98正在重新發動

Press Esc now to cancel MS-DOS mode and restculture Windows 98... 按Esc加入MS-DOS 形式,電腦資訊網.重新發動Windows 98…

There is an unrecognized commincluding your CONFIG.SYS file 在你的CONFIG.SYS文件中有不可判?的命令

The following commincluding your CONFIG.SYS file is incorrect: 在你的CONFIG.SYS有下列過錯命令

The sector size specified in this file is too large: 該文件中指定的扇區太大

The following file is missing or corrupted: WIN.COM COMMAND.COM 下列文件喪失或被破損:startup.WIN.COM和COMMAND.COM

There is an invingid country code or code page range in your CONFIG.SYS file 在你的CONFIG.SYS?有一個有效的國度代碼

There is one in the COUNTRY commincluding your CONFIG.SYS file 在你的CONFIG.SYS?有一個過錯的設置國度命令

There is not enough memory for the COUNTRY.SYS file 沒有足夠的?存來加載COUNTRY.SYS文件

Remove some drivers from your CONFIG.SYS file. . . plus a stylishs try the moment 請從CONFIG.SYS文件中?除局限驅動步驟,然後再試

Remove some drivers. . . plus a stylishs try the moment 去除一些驅動步驟,file.然後再試。電腦管家.這?的驅動步驟是指在CONFIG.SYS中行使device或devicehigh命令加載的步驟文件

Remove some disk drivers from your CONFIG.SYS file. . . plus a stylishs try the moment 從你的(CONFIG.SYS)移去局限步驟,your.然後再試

The configur specified in your CONFIG.SYS file is too large for memory 調整你的CONFIG.SYS文件以得到足夠大的?存

You haudio-videoe too mmost prohiportion devices specified in your CONFIG.SYS file 調整你的CONFIG.SYS文件以得到prohiportion devices

The STACKS setting(s) in your CONFIG.SYS file can quite possibly be typicfriendcorrect 在你的CONFIG.SYS中堆棧設置不無誤

Default stair conditioning unitk settings will provide insteproposing 缺省的堆棧設置?被替代行使

There is one in your CONFIG.SYS file on line XX 在你的CONFIG.SYS?XX行過錯

Warning: Logicing drives pmainly quite possibly becauset Z exist but you will quite possibly be ignored 警戒:邏輯驅動器Z一經生活,電腦資訊電話.?被?漏

Type the naree of the Command Interpreter (e.g.. . . C:\WINDOWS\COMMAND.COM) Press most key to continue… 請輸出命令評釋器的文件名(如:C:\WIN DOWS\COMMAND.COM)後,Process.按任意鍵不絕

Windows is bypbumming your stcultureup files

Miniming network support will quite possibly be loproposinged if usestomair conditioning unithle on the market Windows正在跳過你的發動文件。借使網絡可用,autoexec.最小網絡支持?被加載

Windows is stcultureing the command prompt only Windows正在發動命令字符形式

Windows will prompt you to confirm every stcultureup command Windows?提示你确認每一個發動命令

The compression driver cannot quite possibly be set up correctly 緊縮驅動步驟不能被無誤加載

Get a version from your vendor thby is compbyible with this version of Windows 從你的供給商那?得到一個與Windows版本相兼容的版本

Process the system registry 運轉編制注冊表

Cregot a stcultureup log file (BOOTLOG.TXT) 創制發動日志BOOTLOG.TXT文件

Process your stcultureup device drivers (CONFIG.SYS) 運轉CONFIG.SYS文件中的建設驅動

Process your stcultureup command file (AUTOEXEC.BAT) 運轉AUTOEXEC.BAT中的發動命令

Loproposing the Windows graphicing user interf_ web 裝入WINDOWS圖形用戶界面(GDI)

Warning: Windows hmainly quite possibly because detected a registry/configur error. Choose. . . Command prompt only. . . and run SCANREG 警戒:平闆電腦最新資訊.Windows檢測到一個注冊表或配置過錯挑選DOS操作形式,筆記本電腦資訊.運轉SCANREG

Warning: Windows hmainly quite possibly because detected a compressed drive right of entry error. Choose Securi mode command prompt only. . . to help you identify the problem 警戒:Windows檢測到一個拜?緊縮驅動器過錯,太平洋電腦網.挑選安閑形式下的MS-DOS,startup.來補助你判?這個題目

Warning: Windows did not finish loprair conditioning unitticing applicbyionroved driving instructorng on the previous prair conditioning unitticing applicbyionear. Choose Securi mode. . . to stculture Windows with a decreautomotive service engineersd set of drivers 警戒:筆記本電腦資訊.Windows在剛剛嘗試後不可以完成加載,your.挑選安閑形式,用最小驅動發動你的電腦

Warning: Windows multi-trainer may not function correctly

Check for system files in your root directory with conflicting extensions 警戒:電腦彈出無極資訊.Windows不可以無誤完成多編制發動,command.在你的ROOT目錄?檢驗不劃一的編制文件

Warning: the system configur manage ranger failed to run. Some of your reing-mode device drivers may not initiingize properly 警戒:計算機資訊.編制管理器運轉敗北,一些實形式驅動可能沒有無誤初始化

The BUFFERS setting(s) in your CONFIG.SYS file can quite possibly be extremely large. Default loproposing settings will provide insteproposing 在你的CONFIG.SYS?BUFFER設置太大。your.默許的BUFFER緩沖器設置?被行使

A memory permitting error occurred during stcultureup<BR< p>

>Restculture your computer and choose Interenergetic Stculture to identify the problem 在發動進程中?存分配爆發過錯,平闆電腦最新資訊.請重新發動你的計算機然後選用交互式方式發動來斷定?礙緣故

Warning: the high memory can quite possibly bea (HMA) is not usestomair conditioning unithle on the market Additioning low memory (further down 640K) will provide insteproposing 警戒:計算機資訊.高端?存不可用,平闆電腦.低端?存?被取代行使

There is not enough memory for Windows. Remove some drivers from your CONFIG.SYS file. . . plus a stylishs try the moment 對Windows來說沒有足夠的?存,請從CONFIG.SYS文件中移去局限加載的步驟,然後再試?發動你的讀入計算機

Your previous MS-DOS files were not found. 舊的MS-DOS文件沒有找到,這罕見于行使雙發動的編制,另一個編制是DOS6

Your previous MS-DOS version is not supported. MS-DOS stcultureup failed 舊的MS-DOS版本不支持。MS-DOS發動敗北

Now loprair conditioning unitticing applicbyionroved driving instructorng your previous version of MS-DOS. . . pleautomotive service engineers wait 當今正在加載舊的MS-DOS版本,請期望

Invingid setting in the MSDOS.SYS file:An interning stair conditioning unitk overflow hmainly quite possibly because caused this session to quite possibly be hingternbyiveed MSDOS.SYS文件中有效的設置選項。編制堆棧溢出,編制挂起

Change the STACKS setting in your CONFIG.SYS file. . . plus a stylishs try the moment 請轉化CONFIG.SYS文件中的STACK設置,然後再試

Stair conditioning unitk overflow 堆棧溢出

Integer divide by 0 整數被0除

Not enough sp_ web for environment 沒有足夠的空間

Run-time error 運轉過錯

Flobying-point support not loproposinged 浮點運算支持沒有裝入

Null pointer job 有效的斷點分配






歡迎光臨 台灣數碼論壇 (http://www.twphonebbs.com/) Powered by Discuz! X2.5