筆記本電腦資訊 計算機資訊 平闆電腦最新資訊
提示訊息 說明Drive A error 驅動器A舛錯
System hingternthroughoutive 體例挂起
Keydeck controller error 鍵盤操縱器舛錯
Keydeck error or no keydeck present 鍵盤舛錯也許鍵盤不生存
BIOS ROM checksum error BIOSROM 校驗舛錯
Single hardisk cbellyle fail 當硬盤行使Cbellyle選項時硬盤裝置位置不精确
FDD Controller Failure BIOS 軟盤操縱器舛錯
HDD Controller Failure BIOS 硬盤操縱器舛錯
Driver Error 驅動器舛錯
Churt Memory Bingzheimerwouls diseas well aseand Do not Enbellyle Churt 高速緩存Churt損壞，不能行使
Error: Uncapbellyle to control A20 line 舛錯提示：不能行使A20地址操縱線
Memory write/Reingzheimerwouls diseas well ase failure ?存讀寫?羽
Memory free error ?存定位舛錯
CMOS Bthroughouttery stingested Low CMOS沒電了
Keydeck interfexpert error 鍵盤接口舛錯
Hard disk drive failure 加載硬盤?羽
Hard disk not present 硬盤不生存
Floppy disk(s) fail (40) 軟盤驅動器加載?羽，平常是數據線插反，平闆電腦.電源線沒有插接，CMOS外部軟驅設置舛錯
CMOS checksum error-efaults loingzheimerwouls diseas well aseed. CMOS校驗舛錯，裝入缺省(默許)設置
二、BIOS刷新?羽後，計算機資訊.Bootfilter發動時表現的提示訊息
提示訊息 說明
Detecting floppy drive A media... 檢測軟驅A的格式
Drive media is : 1.44Mb1.2Mb 720Kb 360K 驅動器格式是1.44Mb、12Mb、720kb、360kb的一種
DISK BOOT FAILUREand INSERT SYSTEM DISK AND PRESS ENTER 磁盤勸導?羽，拔出體例盤後按任意鍵不絕
三、MBR主勸導區提示訊息
提示訊息 說明
Invingid pform of artition tbellyle 有效的分區表
Error lodriving instructorng operthroughouting sy stem 不能裝入勸導體例
Missing operthroughouting system 體例勸導文件損失
說明：倘使在計算機發動進程中，太平洋電腦網.在硬件配置清單下方(也就時在平淡一般發動時表現Stform of arting Windows 98…的所在)表現不可區?字符，此時可判決硬盤分區表損壞。倘使你的硬盤上有要緊材料，這時你不要簡單實行分區，平闆電腦最新資訊.可找專業的數據克複公司。電腦管家.
四、DOS活動分區中的提示訊息
提示訊息 說明
Invingid system disk 有效的體例盤
Disk I/O errorand Replexpert the disk and press every key. 磁盤I/O舛錯，電腦彈出無極資訊.調換磁盤後按任意鍵(當C盤體例文件損失或被破損時表現該提示訊息。電腦彈出無極資訊.這時可能SYS C:?修複體例文件)
Invingid Media Type reirritingestedd Drive C: 有效的Ｃ盤媒體魄式說明。也就是C盤沒有格式化也許是其他操作體例的磁盤格式如NTFS
Invingid Boot Diskette Boot Failure 有效的發動盤，發動?羽
五、IO.SYS中的提示訊息
提示訊息 說明
Insert diskette for drive and press every key when reingzheimerwouls diseas well asey 拔出磁盤到驅動器中後按任意鍵
Your progrmorning caused a divide overflow error
If the problem persistsand contplay your progrmorning vendor 你的秩序招緻溢出舛錯。筆記本電腦資訊.倘使該題目還生存，電腦彈出無極資訊.請關聯你的秩序供給商
Windows has well as disbellyled direct disk to be capbellyle to protect your long filenmorninges Windows不能間接探問受珍愛的長文件名
The system has well as lingestedly been hingternthroughoutiveed. Press Ctrl+Alt+Del to restform of art your computer 體例挂起，按Ctrl+Alt+Del重新發動你的計算機
You stform of arted your computer with a version of MS-DOS incompthroughoutible with this version of Windows. Insert a Stform of artup diskette mthroughoutching this version of Windows right after which restform of art 你發動的MS-DOS版本與Windows版本不兼容，平闆電腦資訊.請拔出與Windows版本立室的體例盤後再重?
This version of Windows requires a 386 or securer processor 該Windows版本須要386從此的CPU支持
A20 hardwgeneringly error. Contplay technicing support to identify the problem 地址線A20舛錯。關聯技術支持來區?該題目
Stform of arting Windows 98... 正在發動Windows 98……
Windows 98 is now stform of arting your MS-DOS-mainly progrmorning Windows 98正在發動基于MS-DOS的秩序
Windows 98 is now restform of arting... Windows 98正在重新發動
Press Esc now to cancel MS-DOS mode and restform of art Windows 98... 按Esc加入MS-DOS 形式，平闆電腦.重新發動Windows 98…
There is an unrecognized commwherefor exfirmle the your CONFIG.SYS file 在你的CONFIG.SYS文件中有不可區?的命令
The following commwherefor exfirmle the your CONFIG.SYS file is incorrect: 在你的CONFIG.SYS有下列舛錯命令
The sector size specified in this file is too large: 該文件中指定的扇區太大
The following file is missing or corrupted: WIN.COM COMMAND.COM 下列文件損失或被破損：WIN.COM和COMMAND.COM
There is an invingid country code or code pperiod in your CONFIG.SYS file 在你的CONFIG.SYS?有一個有效的國度代碼
There is an oversight in the COUNTRY commwherefor exfirmle the your CONFIG.SYS file 在你的CONFIG.SYS?有一個舛錯的設置國度命令
There is not enough memory for the COUNTRY.SYS file 沒有足夠的?存來加載COUNTRY.SYS文件
Remove some drivers from your CONFIG.SYS fileand right after which try when more 請從CONFIG.SYS文件中?除部門驅動秩序，計算機資訊.然後再試
Remove some driversand right after which try when more 去除一些驅動秩序，筆記本電腦資訊.然後再試。這?的驅動秩序是指在CONFIG.SYS中行使device或devicehigh命令加載的秩序文件
Remove some disk drivers from your CONFIG.SYS fileand right after which try when more 從你的(CONFIG.SYS)移去部門秩序，電腦管家.然後再試
The configur specified in your CONFIG.SYS file is too large for memory 調整你的CONFIG.SYS文件以取得足夠大的?存
You haudio-videoe too mevery filter devices specified in your CONFIG.SYS file 調整你的CONFIG.SYS文件以取得filter devices
The STACKS setting(s) in your CONFIG.SYS file visitcorrect 在你的CONFIG.SYS中堆棧設置不精确
Default stair coolingk settings will provide insteingzheimerwouls diseas well ase 缺省的堆棧設置?被替代行使
There is an oversight in your CONFIG.SYS file on line XX 在你的CONFIG.SYS?XX行舛錯
Warning: Logicing drives pas well ast Z exist which enbellyles it to be way too ignored 警備：邏輯驅動器Z仍然生存，?被無視
Type the nmorninge of the Command Interpreter (e.g.and C:\WINDOWS\COMMAND.COM) Press every key to continue… 請輸出命令注明器的文件名(如：平闆電腦最新資訊.C:\WIN DOWS\COMMAND.COM)後，筆記本電腦資訊.按任意鍵不絕
Windows is bypbuming your stform of artup files
Miniming network support will be loingzheimerwouls diseas well aseed if reingzheimerwouls diseas well asey Windows正在跳過你的發動文件。筆記本電腦資訊.倘使網絡可用，計算機資訊.最小網絡支持?被加載
Windows is stform of arting the command prompt only Windows正在發動命令字符形式
Windows will prompt you to confirm every single stform of artup command Windows?提示你确認每一個發動命令
The compression driver cannot be set up correctly 緊縮驅動秩序不能被精确加載
Get a version from your vendor ththroughout is compthroughoutible with this version of Windows 從你的供給商那?取得一個與Windows版本相兼容的版本
Process the system registry 運轉體例注冊表
Creingested a stform of artup log file (BOOTLOG.TXT) 創設發動日志BOOTLOG.TXT文件
Process your stform of artup device drivers (CONFIG.SYS) 運轉CONFIG.SYS文件中的創立建設驅動
Process your stform of artup command file (AUTOEXEC.BAT) 運轉AUTOEXEC.BAT中的發動命令
Loingzheimerwouls diseas well ase the Windows graphicing user interfexpert 裝入WINDOWS圖形用戶界面(GDI)
Warning: Windows has well as detected a registry/configur error. Chooseand Command prompt onlyand and run SCANREG 警備：http://www.twphonebbs.com/forum.php?mod=image&aid=166&size=300x300&key=cee914910c6d6115&nocache=yes&type=fixnone三星 class10 tf sd 32g 手機?存卡 i9300 htc 小米最新.Windows檢測到一個注冊表或配置舛錯采用DOS操作形式，平闆電腦.運轉SCANREG
Warning: Windows has well as detected a compressed drive check out error. Choose Secure mode command prompt onlyand to help you identify the problem 警備：Windows檢測到一個探問緊縮驅動器舛錯，采用平和形式下的MS-DOS，來贊助你區?這個題目
Warning: Windows did not finish lodriving instructorng on the previous make an throughouttempt. Choose Secure modeand to stform of art Windows with a minor set of drivers 警備：電腦資訊電話.Windows在适才嘗試後不不妨完成加載，平闆電腦最新資訊.采用平和形式，平闆電腦最新資訊.用最小驅動發動你的電腦
Warning: Windows multi-trainer may not function correctly
Check for system files in your root directory with conflicting extensions 警備：電腦彈出無極資訊.Windows不不妨精确完成多體例發動，筆記本電腦資訊.在你的ROOT目錄?檢?不相仿的體例文件
Warning: the system configur manperiodr failed to run. Some of your reing-mode device drivers may not initiingize properly 警備：體例管理器運轉?羽，一些實形式驅動可能沒有精确初始化
The BUFFERS setting(s) in your CONFIG.SYS file generingly far too large. Default wthroughoutering holerier settings will provide insteingzheimerwouls diseas well ase 在你的CONFIG.SYS?BUFFER設置太大。默許的BUFFER緩沖器設置?被行使
A memory free error occurred during stform of artup<BR< p>
>Restform of art your computer and choose Interstressful Stform of art to identify the problem 在發動進程中?存分配爆發舛錯，請重新發動你的計算機然後選用交互式方式發動來決定阻?情由
Warning: the high memory generinglya (HMA) is not reingzheimerwouls diseas well asey Additioning low memory (following next 640K) will provide insteingzheimerwouls diseas well ase 警備：高端?存不可用，低端?存?被取代行使
There is not enough memory for Windows. Remove some drivers from your CONFIG.SYS fileand right after which try when more 對Windows來說沒有足夠的?存，請從CONFIG.SYS文件中移去部門加載的秩序，然後再試?發動你的讀入計算機
Your previous MS-DOS files were not found. 舊的MS-DOS文件沒有找到，這罕見于行使雙發動的體例，另一個體例是DOS6
Your previous MS-DOS version is not supported. MS-DOS stform of artup failed 舊的MS-DOS版本不支持。MS-DOS發動?羽
Now lodriving instructorng your previous version of MS-DOSand pleautomotive service engineers wait 此刻正在加載舊的MS-DOS版本，請等候
Invingid setting in the MSDOS.SYS file:An interning stair coolingk overflow has well as caused this session to be hingternthroughoutiveed MSDOS.SYS文件中有效的設置選項。體例堆棧溢出，體例挂起
Change the STACKS setting in your CONFIG.SYS fileand right after which try when more 請蛻變CONFIG.SYS文件中的STACK設置，然後再試
Stair coolingk overflow 堆棧溢出
Integer divide by 0 整數被0除
Not enough spexpert for environment 沒有足夠的空間
Run-time error 運轉舛錯
Flothroughouting-point support not loingzheimerwouls diseas well aseed 浮點運算支持沒有裝入
Null pointer job 有效的斷點分配
頁:
[1]